Steel Curtain Wall Systems for Architectural Projects
Bespoke steel curtain wall and glazed façade systems for architectural projects requiring large glazed areas, durable framing and precise detailing.
Large glazed areas with the strength and character of steel
Steel curtain wall systems can deliver slender framing, strong visual lines and durable glazed façades for commercial and architectural schemes. The system needs to be coordinated with structure, glazing, drainage and adjoining construction.
- Entrance façades
- Commercial lobbies
- Feature glazing
- Internal atrium walls
- Large fixed screens
- Integrated doors
Detail the grid, glass and interfaces before fabrication
Mullion spacing, transom positions, glass type, interfaces and tolerances should be resolved early so the finished façade aligns with both the architectural intent and practical installation conditions.
- Grid and module planning
- Glass thickness and type
- Perimeter interfaces
- Integrated entrance doors
- Drainage and weathering
- Finish and coating
The details that make the difference on site
The best results usually come from resolving the practical details before manufacturing starts.
Opening & structure
Confirm clear opening size, wall construction, floor level and any surrounding finishes that affect the frame.
Door operation
Define swing, frequency of use, access requirements and any emergency or escape function.
Hardware & integration
Coordinate locks, closers, handles, access-control devices and other project interfaces before manufacture.
A closer look at Steel Curtain Wall Systems
Relevant examples from the existing AllSecureDoors project image library.
Clear stages from enquiry to handover
Discuss
We review the opening, intended use, drawings and any stated performance requirements.
Survey & specify
Dimensions, interfaces and configuration are confirmed before the doorset is released for manufacture.
Manufacture & install
The agreed system is produced, delivered and installed with final adjustment and handover.
Questions project teams often ask
Can the system be made to a non-standard opening?
Yes. The page is built around project-specific sizing, but accurate dimensions and surrounding construction details should be confirmed before manufacture.
Can access control or specialist hardware be included?
Where appropriate, hardware and access-control requirements should be identified early so preparation can be coordinated with the door and frame.
What information should I send for a quote?
Opening dimensions, site location, photographs, drawings if available, required performance, hardware needs and target programme are the most useful starting points.
Can you support replacement projects as well as new construction?
Yes. Existing openings often need extra attention around thresholds, wall construction and previous alterations, so survey information is especially useful.
Tell us what the opening needs to achieve.
Send the opening size, location, drawings if available, required performance, hardware needs and project timeline. We can help you identify the next practical step.